ESIM264
Control Panel with GSM/GPRS communicator
End-of-life product: 2018-03-01
Built-in Quad-Band GSM/GPRS communicator
SMS and/or CALLS to 5 authorised users
4 ways of configuration: SMS, Keypad, USB or Internet
Event Log access by Internet
Certifications
What is it?
ESIM264 is a very simple and easy to use intrusion alarm panel with GSM/GPRS communicator and optional PSTN module. It monitors up to 44 zones, transmits signals to alarm receiving center and informs home owner as well.
What it does?
ESIM264 monitor third party wired sensors: door, windows, motion and report about a security breach to alarm receiving centers, using their preferred protocols or home owner via SMS or voice call. ESIM264 allows to control home temperature and various electrical devices with a mobile phone or a remote control. It can alert about electrical, water system failure (special firmware required), fire and other dangers.
Usage examples
Intrusion alarm
Greenhouse monitoring
Thermal units protection and monitoring
Elevator status monitoring
Main features
- Arm/disarm by free of charge call, keypad, iButton, wireless keyfob or any input
- Built-in Quad-Band GSM/GPRS communicator
- SMS and/or CALLS to 5 authorised users
- Temperature measurement and alarm when the controlled temperature exceeds the allowed limits
- CONTACT ID for monitoring station trough GSM voice or GPRS
- STAY feature
- Intercom extension module
- 4 ways of configuration: SMS, Keypad, USB or Internet
- Event Log access by Internet
- Compatible with EGR100 monitoring station software
Download ESIM264 firmware If you did not find the required firmware,
please contact us directly
Register to download
or login here if you already have an account
Videos
Frequently asked questions (FAQ)
Can I connect ESIM264 to Eldes Smart Security App?
Unfortunately no, Eldes Smart Security App is available with new generation security panels ESIM364/ESIM384/Pitbull/Pitbull PRO. You can find all information about App on https://eldesalarms.com/migration/
How can I reset my ESIM264 to default?
You can reset your panel to default with these easy steps:
NOTE! After reseting panel to default all settings will be lost. Save configuration file first.
1. Disconnect the power supply and backup battery
2. Short circuit (Connect) DEF pins on the panel board
3. Power up the device for 7 seconds.
4. Power down the device.
5. Remove short circuit from DEF pins.
6. Parameters restored to default.
What are the prices of ELDES production?
To get the prices of the devices please check ELDES disributors’ Internet sites. Otherwise, feel free to contact out partners in your country/city by telephone or e-mail.
Can I purchase ELDES devices directly from you?
You can purchase ELDES production only from our distributors. If you have any ideas or intentions to create a new nonstandart device or suggestions how to improve our current devices contact us directly or our partners in your country.
Where can I purchase ELDES devices if your distributors are not available in my country?
Feel free to contact us.
Specifications
| GMS modem frequency | 850/900/1800/1900 MHz |
| Power supply voltage | 16-24V AC or 18-24V DC |
| On-board zones | 6 (12 in ATZ mode). *Possibility to increase to 44 |
| PGM outputs | 4. *Possibility to increase to 44 |
| Supported protocols | ADEMCO CONTACT ID |
| Ways of configuration | SMS, USB, Internet, keypad |
| Operating temperature | -20…+55°C |
| Maximum number of wireless devices | 16 |
| Radio transmitter-receiver frequency for wireless connection | 868 MHz |
| Supported amount of keyboard | 4 EKB3 or EKB2 |
| Dimensions | 140×100×18mm |
| GMS modem frequency | 850/900/1800/1900 MHz |
| Power supply voltage | 16-24V AC or 18-24V DC |
| On-board zones | 6 (12 in ATZ mode). *Possibility to increase to 44 |
© 2023 UAB Eldes. All rights reserved.
Ukmerges str. 283b, LT-06313 Vilnius, Lithuania
