Pitbull Alarm PRO

A unique security solution in a body of a motion sensor. Works as a stand-alone device or as an intrusion alarm panel with up to 16 wireless devices. Pitbull Alarm PRO offers quick installation and configuration. Plus, it supports up to 4 Dahua IP cameras, giving possiblity to have video & security in a single Eldes Security App!

Simple and Flexible Installation

Pitbull Alarm PRO is very easy to install –  it does not require any wiring. Intuitive Eldes Utility software makes the configuration even faster allowing to add wireless accessories in a single click. The whole system can be fully installed in less than 30 minutes!

Eldes_www_Pitbull_PRO_installation
Eldes_www_Pitbull

Ultimate Wireless Technology

The innovative wireless technology from Eldes enables an impressive range of up to 3 km in open areas. Thick walls and multiple-store properties are no longer an obstacle, making installation of the system in residences and shops reliable and effortless.

Eldes_www_Pitbull_house_EWS4

Highest Level Protection Against Intruders

Pitbull Alarm PRO will immediately alert security company and home owner in case of uninvited guests break into your premises; power outage (back-up battery will operate up to 24 h); or a burglar tries to jam the wireless signal. The alarm panel uses encrypted two-way communication on 868 MHz frequency. 2x Nano SIM cards ensures extra safety in places where GSM service is unstable.

Eldes_www_Pitbull_egr100

Simple Connection to Monitoring Station

Easily connect Pitbull Alarm PRO to almost any monitoring station using free EGR100 software. It supports 5 main protocols (SIA IP, Kronos, Kortex SMS, EGR100 and Contact ID). In case of alarm, security company and user will be immediately notified to protect the property from any burglary attempts.

Eldes_www_Pitbull_egr100

Complete Home Security with Eldes

Pitbull Alarm PRO supports full range of wireless accessories: fire, flood protection, door/window contacts, motion sensors, multiple sirens and even more. Up to 16 wireless devices allows to create the safest security solution!

Eldes_www_Pitbull_PRO_products

Multiple Ways to Control Security System

Eldes Security System can be controlled with different devices. Choose the most convenient for you and your family members: intuitive and easy-to-use Eldes Security Mobile App, wireless keypads, keyfob or use SMS/Calls.

Exceptional Video Monitoring

Do you want to see what’s happening at home anytime? Easily add up to 4 Dahua IP cameras to Eldes Security System, no port forwarding is needed. In case of alarm, you can watch live view from violated zone and check what’s exactly happening at home. In addition, the camera offers advanced control features: Pan&Tilt zoom, video recording, camera events and even more!

Download Pitbull PRO firmware If you did not find the required firmware,
please contact us directly

Register to download

or if you already have an account

Frequently asked questions (FAQ)

How to restore default parameters?

1. Unplug USB cable (if any)
2. Open PITBULL ALARM PRO enclosure.
3. Press and hold the RESET button.
4. Wait for the LED to flash quickly several times.
5. Power down PITBULL ALARM PRO.
6. Power up PITBULL ALARM PRO.
7. Configuration has been restored to default.

When registering panel to Smart Security App screen gets stuck and shows 0%

If you are connecting your security panel to Smart Security App and you see this screen for few minutes, please check following settings:

1. Make sure you’ve enabled and saved Cloud Services on your panel.
2. Make sure SIM card inserted to your central panel has available mobile data.
3. Make sure you typed correct APN settings if it’s needed. To find out APN settings please contact your network operator.
4. Make sure remote configuration session has ended.
5. You can restart your panel for changes to take effect faster if App doesn‘t start after few minutes.

How can I restart my security panel remotely?

Send SMS to SIM card inserted to Pitbull PRO with text:

XXXX RESET (example: 1111 reset) (SMS can contain upper or lower case letters)

XXXX – Your SMS password. If you don‘t know your SMS password please contact your system installer.

System will inform you automatically via SMS message when Pitbull PRO will be restarted. This might take up to 2 minutes.

How can I update firmware (FW) for Pitbull PRO locally?

Before updating FW it is recommended to save configuration file of your central panel.

You can download latest Pitbull PRO firmware from https://eldesalarms.com/product/pitbull-alarm-pro/„Download Pitbull Alarm PRO firmware“ section. Please make sure you are logged in to our webpage to be able download files. When file is downloaded and saved to your PC use following instruction:

1. Disconnect the power supply and backup battery.
2. Open PITBULL ALARM enclosure.
3. Connect PITBULL ALARM to the PC via USB cable.
4. Press and hold the RESET button.
5. Connect the power supply.
6. Release the RESET button after the new window pops-up containing a .bin file. Otherwise open My Computer
and look for Boot Disk drive.
7. Delete the .bin file located in this drive.
8. Copy and paste in the very same window.
9. After the copying is done, power down PITBULL ALARM.
10. Unplug USB cable.
11. Power up PITBULL ALARM.
12. Firmware upgraded.

How can I update firmware (FW) for Pitbull PRO remotely?

Send SMS message to SIM card that is inserted to Pitbull PRO with text:

XXXX FOTA (example: 1111 fota) (SMS can contain upper or lower case letters)

XXXX – Your SMS password. If you don‘t know your SMS password please contact your system installer.

System will inform you automatically via SMS message when FW will be updated. This can take up to 20 minutes depending on GPRS connection speed.

How EWD3, EWP3, EWS3 and EWS2 should be reset to default?

How to restore EWD3 to default parameters?

  1. Press and hold the RESET button.
  2. Hold the RESET button and watch the LED indicator quickly flash (for approx. 5 seconds.).
  3. Release the RESET button.
  4. Parameters restored to default.

 

How to restore EWP3 to default parameters?

  1. Press and hold the RESET button.
  2. Hold the RESET button and watch the LED indicator quickly flash (for approx. 5 seconds.).
  3. Release the RESET button.
  4. Parameters restored to default.

 

How to restore EWS3 to default parameters?

1. Remove one battery from EWS3.
2. Press and hold the RESET button.
3. Insert the battery back to EWS3.
4. Hold the RESET button until LED indicator starts blinking.
5. Release the RESET button.
6. Parameters reset to default.

 

How to restore EWS2 to default parameters?

1. Remove one battery from EWS2.
2. Press and hold the RESET button.
3. Insert the battery back to EWS2.
4. Hold the RESET button until LED indicator starts blinking.
5. Release the RESET button.
6. Parameters reset to default.

What are the prices of ELDES production?

To get the prices of the devices please check ELDES disributors’ Internet sites. Otherwise, feel free to contact out partners in your country/city by telephone or e-mail.

Can I purchase ELDES devices directly from you?

You can purchase ELDES production only from our distributors. If you have any ideas or intentions to create a new nonstandart device or suggestions how to improve our current devices contact us directly or our partners in your country.

Where can I purchase ELDES devices if your distributors are not available in my country?

Feel free to contact us.

Can I connect more sensors or a siren to ELDES Epir?

Yes, it is possible to connect to ELDES EPIR (with integrated 868MHz radio receiver-transmitter) up to 16 wireless ELDES devices (PIR sensors, expansion modules, sirens and etc.).

Pitbull Alarm PRO also offers version for 3G mobile network. Click the button and check its features!

Specifications

Supply voltage11-15V 500mA max
Current used in idle stateup to 50mA
Back-up battery voltage, capacity8.4V; 350mAh
Back-up battery typeNi-Mh
SIM card typeNano SIM ×2
GSM modem frequency900/1800 Mhz
Dimensions124x67x58mm
Operating temperature range-10…+40 °C
Humidity0-90% RH @ 0… +40°C (0-90% RH @ +32… +104°F)
Back-up battery operating timeup to 24 hours*
Detection angle90°
Maximum motion detection range10m (32.81ft)
Wireless bandISM868 (Reg 1) / ISM915 (Reg 2)
Wireless communication rangeup to 3000m (9842.5ft) in open areas
Maximum number of wireless devices16
CommunicationsSMS, Voice Calls, GPRS Network
Supported protocolsAdemco Contact ID, EGR100, Kronos, Cortex SMS, SIA IP
BELL+: siren output commuted valuesCurrent - 150mA max.; voltage - 15V (PITBULL ALARM PRO on
external power supply) / 7V (PITBULL ALARM PRO on back-up battery)
* - with ELDES Cloud Services disabled; with wireless transmitter-receiver module disabled

Where to buy?